Titanium Alloy Fasteners
Our Products
- Pipes & Tubes
- Plates And Sheets
- Round Bars
- Flanges
- Forged Fitting
- Buttweld Fitting
- Fasteners
- Stainless Steel Fasteners
- Copper Nickel Alloy Fasteners
- Alloy Steel Fasteners
- Carbon Steel Fasteners
- Alloy 20 Fasteners
- Titanium & Titanium Alloys Fasteners
- Nickel & Nickel Alloys Fasteners
- Monel Alloy Fasteners
- Hastelloy Fasteners
- Incoloy Fasteners
- Inconel Fasteners
- Duplex Steel Fasteners
- Super Duplex Steel Fasteners
Titanium Alloy Fasteners
Titanium Alloy Fasteners
Titanium Alloy Grade 1 Fasteners | Titanium Alloy Grade 2 Fasteners | Titanium Alloy Grade 3 Fasteners Manufacturer
Titanium Alloy Grade 4 Fasteners | Titanium Alloy Grade 5 Fasteners | Titanium Alloy Grade 7 Fasteners Exporter In India
Expinox Alloys is a regarded organization that is practically occupied with giving an across the board assortment of Titanium Alloys Fasteners. We offer the same at temperate costs to our customers. Titanium Grade 2 Fasteners has a high partiality for gasses including oxygen, nitrogen and hydrogen. Retention of oxygen results in the arrangement of a greatly hard, fragile oxygen-stablized alpha stage layer known as alpha case after warming in air.
Intermediate and final annealing of of Titanium Grade 5 Fasteners is frequently performed in a vacuum or dormant gas environment to keep away from alpha case development and the related material misfortune. As a supplier, stockiest, exporter and maker, we give these Titanium Grade 7 Fasteners in custom-constructed thicknesses and sizes as per accurate necessities of our very much respected supporters.
Specification
| Dmensions | DIN, ASTM, BS and all International Standards |
|---|---|
| Standards | DIN 912, DIN913, DIN916, DIN 933, DIN 934, DIN963, DIN 7991, DIN 6921, ISO 7380, ISO 7984 etc. |
| Size | M10 to M100 |
| Length | up to 5 meters |
| Grades | GR I, GR -2, GR-3, GR-4, GR-5, GR-7 |
| Types | Nuts, Screw, Bolts, Sockets, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Studs, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U- Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts. |
Chemical Composition
| C | Fe | H | N | O | Ti |
|---|---|---|---|---|---|
| max | max | max | max | max | max |
| 0.1 | 0.2 | 0.015 | 0.03 | 0.18 | 99.5 |
Mechnical Properties
| Hardness, Brinell | 120 | 120 | annealed |
|---|---|---|---|
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| Elongation at Break | 24 % | 24 % | |
| Reduction of Area | 35 % | 35 % | |
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.37 | 0.37 | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Shear Modulus | 45 GPa | 6530 ksi |
Physical Properties
| Physical Properties | Metric | English |
|---|---|---|
| Density | 4.51 g/cc | 0.163 lb/in³ |
© All Rights Reserved. Design By Mesotek