Incoloy Alloy Fasteners
Our Products
- Pipes & Tubes
- Plates And Sheets
- Round Bars
- Flanges
- Forged Fitting
- Buttweld Fitting
- Fasteners
- Stainless Steel Fasteners
- Copper Nickel Alloy Fasteners
- Alloy Steel Fasteners
- Carbon Steel Fasteners
- Alloy 20 Fasteners
- Titanium & Titanium Alloys Fasteners
- Nickel & Nickel Alloys Fasteners
- Monel Alloy Fasteners
- Hastelloy Fasteners
- Incoloy Fasteners
- Inconel Fasteners
- Duplex Steel Fasteners
- Super Duplex Steel Fasteners
Incoloy Alloy Fasteners
Incoloy Alloy 800/800HT/825 Fasteners
Incoloy 800/800HT/825 UNS N08800/N08811/N08825 Fasteners | Incoloy 800/800HT/825 ANSI B16.11 Fasteners Manufacturer In India
Incoloy 800/800HT/825 ASTM B564 Fasteners | Incoloy 800/800HT/825 ASME B160 Fasteners | Incoloy 800/800HT/825 Fasteners Exporter In Mumbai
Expinox Alloys has increased one of the most noteworthy positions in the business for amassing and supplying astonishing catch including Incoloy Alloy Fasteners. The way of the thing is the matter of previous thought for our association, so we make these hooks under the strict overall quality parameters of weight and size. We are advancing broad assortment of these fasten in particular estimations as indicated by the necessities of clients.
As a producer, supplier, stockiest and exporter, we offer these UNS N08800/11/25 Fasteners in specially designed sizes and thicknesses according to the careful requests of our regarded customers. We offer these Incoloy Alloy 800/800HT/825 Fasteners in worldwide and national nature of benchmarks at savvy rates to our supporters.
Specification
| Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Grade | Incoloy 800 (UNS N08800) Incoloy 800H (UNS N08810) Incoloy 800HT (UNS N08811) Incoloy 825(UNS N08825) |
| Werkstoff Nr | 1.4876/4958/59/2.4858 |
| Specification | ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 |
| Length | UPTO 1 METERS |
| Size | M10 TO M100 |
| Types | Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U- Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts. |
Chemical Composition
| Incoloy | 800 | 800H | 825 |
|---|---|---|---|
| Ni | 30-35 | 30-35 | 38.0 – 46.0 |
| Fe | 39.5 min | 39.5 min | 22.0 min |
| Cr | 19-23 | 19-23 | 19.5 - 23.5 |
| Cu | 0.75 max | 0.75 max | 1.5 - 3.0 |
| Ti | 0.15-0.60 | 0.15-0.60 | 0.6 - 1.2 |
| Al | 0.15-0.60 | 0.15-0.60 | 0.2 max |
| C | 0.1 max | 0.05-0.1 | 0.05 max |
| Mn | 1.5 max | 1.5 max | 1.0 max |
| S | 0.015 max | 0.015 max | 0.015 max |
| Si | 1.0 max | 1.0 max | 0.5 max |
| Mb | - | - | 2.5 - 3.5 |
Mechanical Properties
| Inconel 800/800HT | |
|---|---|
| Tensile Strength | Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2%Offset) | Psi – 30,000 , MPa –205 |
| Elongation | 30 % |
| Inconel 825 | |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa –220 |
| Elongation | 30 % |
Physical Properties of Incoloy 800/800HT
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F |
Physical Properties of Incoloy 825
| Density | 8.14 g/cm3 |
|---|---|
| Melting Point | 1400 °C (2550 °F) |
© All Rights Reserved. Design By Mesotek