Aluminium Alloy Plates & Sheets
Aluminium Alloy 5052 Plates & Sheets
Aluminium Alloy 5052 H32 Sheets Plates | Aluminium Alloy 5052 H32 Sheets | Aluminium Alloy 5052 H32 Plates Stockist
ASTM B209 Aluminium Alloy 5052 H32 Sheets Plates Exporter | ASME SB 209 Aluminium Alloy 5052 H32 Sheets Plates Manufacturer In India
Expinox Alloys are manufacturers, exporters & suppliers of Aluminium Alloy 5052 Plates & Sheets. Aluminum combination 5052 in H32 temper has great consumption imperviousness to seawater and marine and mechanical climate. It additionally has great weldability and great frosty formability. It is a medium to high quality combination with a quality somewhat higher than 5251 and a medium to high weakness quality.
Specification
| Grades |
Aluminium Alloy 5052 |
| Thickness |
0.5mm – 250mm |
| Width |
1000mm-3000mm |
| Production |
Hot-Rolled (HR) / Cold-Rolled (CR) |
Chemical Composition
| Elements |
Percentage |
| Manganese (Mn) |
0.0 - 0.10 |
| Iron (Fe) |
0.0 - 0.40 |
| Copper (Cu) |
0.0 - 0.10 |
| Magnesium (Mg) |
2.20 - 2.80 |
| Silicon (Si) |
0.0 - 0.25 |
| Zinc (Zn) |
0.0 - 0.10 |
| Chromium (Cr) |
0.15 - 0.35 |
| Others (Total) |
0.0 - 0.15 |
| Other (Each) |
0.0 - 0.05 |
| Aluminium (Al) |
Balance |
Physical Properties
| Physical Property |
Value |
| Density |
2.68 g/cm³ |
| Melting Point |
605 °C |
| Thermal Expansion |
23.7 x10^-6 /K |
| Modulus of Elasticity |
70 GPa |
| Thermal Conductivity |
138 W/m.K |
| Electrical Resistivity |
0.0495 x10^-6 Ω .m |
Mechanical Properties
| Mechanical Property |
Value |
| Tensile Strength |
210 - 260 MPa |
| Proof Stress |
130 Min MPa |
| Hardness Brinell |
61 HB |
Aluminium Alloy 5083 Plates & Sheets
Aluminium Alloy 5083 Sheets Plates | Aluminium Alloy 5083 Sheets | Aluminium Alloy 5083 Plates Stockist
ASTM B209 Aluminium Alloy 5083 Sheets Plates Exporter | ASME SB 209 Aluminium Alloy 5083 Sheets Plates Manufacturer In India
Expinox Alloys are manufacturers, exporters & suppliers of Aluminium Alloy 5083 Plates & Sheets. Aluminum Alloy 5083 Plates & Sheets are known for excellent execution in amazing situations. Aluminum Alloy 5083 Plates & Sheets are exceptionally impervious to assault by both seawater and mechanical concoction situations.
Aluminum Alloy 5083 Plates & Sheets likewise holds outstanding quality in the wake of welding. Aluminum Alloy 5083 Plates & Sheets has the most elevated quality of the non-heat treatable compounds yet is not suggested for use in temperatures in abundance of 65°C.
Specification
| Grades |
Aluminium Alloy 5083 |
| Thickness |
0.5mm – 250mm |
| Width |
1000mm-3000mm |
| Production |
Hot-Rolled (HR) / Cold-Rolled (CR) |
Chemical Composition
| Elements |
Percentage |
| Manganese (Mn) |
0.40 - 1.00 |
| Iron (Fe) |
0.40 max |
| Copper (Cu) |
0.10 max |
| Magnesium (Mg) |
4.00 - 4.90 |
| Silicon (Si) |
0.40 max |
| Zinc (Zn) |
0.25 max |
| Chromium (Cr) |
0.05 - 0.25 |
| Titanium (Ti) |
0.15 max |
| Aluminium (Al) |
Balance |
Physical Properties
| Property |
Value |
| Density |
2.65 g/cm³ |
| Melting Point |
570 °C |
| Thermal Expansion |
25 x10^-6 /K |
| Modulus of Elasticity |
72 GPa |
| Thermal Conductivity |
121 W/m.K |
| Electrical Resistivity |
0.058 x10^-6 Ω .m |
Mechanical Properties
| Property |
Value |
| Proof Stress |
145 MPa |
| Tensile Strength |
300 MPa |
| Elongation A50 mm |
23 % |
| Shear Strength |
175 MPa |
| Hardness Vickers |
75 HV |
Aluminium Alloy 5086 Plates & Sheets
<
Aluminium Alloy 5086 Sheets Plates | Aluminium Alloy 5086 Sheets | Aluminium Alloy 5086 Plates Stockist
ASTM B209 Aluminium Alloy 5086 Sheets Plates Exporter | ASME SB 209 Aluminium Alloy 5086 Sheets Plates Manufacturer In India
Expinox Alloys are manufacturers, exporters & suppliers of Aluminium Alloy 5086 Plates & Sheets. Aluminum Alloy 5086 Plates and Sheets have considerably higher quality than 5052 or 5083 and its mechanical properties change essentially with solidifying and temperature. Aluminum Alloy 5086 Plates and Sheets is not reinforced by warmth treatment; rather, Aluminum Alloy 5086 Plates and Sheets gets to be more grounded because of strain solidifying or frosty working of the material.
This Aluminum Alloy 5086 Plates and Sheets can be promptly welded, holding the vast majority of its mechanical quality. The great results with welding and great consumption properties in seawater make Alloy 5086 to a great degree prominent in marine applications. Aluminum Alloy 5086 Plates and Sheets has been utilized as a part of vehicle reinforcement plate because of its high quality component.
Specification
| Grades |
Aluminium Alloy 5086 |
| Thickness |
0.5mm – 250mm |
| Width |
1000mm-3000mm |
| Production |
Hot-Rolled (HR) / Cold-Rolled (CR) |
Chemical Composition
| Elements |
Percentage |
| Silicon |
0.4 |
| Iron |
0.5 |
| Copper |
0.1 |
| Manganese |
0.20-0.70 |
| Magnesium |
3.5-4.5 |
| Chromium |
0.05-0.25 |
| Zinc |
0.25 |
| Titanium |
0.15 |
| Others, each |
0.05 |
| Others, total |
0.15 |
| Balance, Aluminum |
|
Mechanical Properties
| Temper |
Tensile Strength |
Yield Strength |
Elongation |
| |
KSI |
KSI |
% |
| O (annealed) |
44 |
14 |
16 |
| H32 |
47 |
28 |
12 |
| H112 |
35 |
14 |
14 |
| H116 |
40 |
28 |
10 |
Aluminium Alloy 5454 Plates & Sheets
Aluminium Alloy 5454 Sheets Plates | Aluminium Alloy 5454 Sheets | Aluminium Alloy 5086 Plates Stockist
ASTM B209 Aluminium Alloy 5454 Sheets Plates Exporter | ASME SB 209 Aluminium Alloy 5454 Sheets Plates Manufacturer In India
Expinox Alloys are manufacturers, exporters & suppliers of Aluminium Alloy 5454 Plates & Sheets. Aluminum Alloy 5454 Plates and Sheets has great erosion resistance, specifically to seawater and general ecological conditions. Quality is medium to high and comparable combination 5754 with great quality in the temperature range 65 to 170 degrees centigrade. Aluminum Alloy 5454 Plates and Sheets has a high exhaustion quality. Aluminum Alloy 5454 Plates and Sheets is not reasonable for perplexing or fine expulsions.
Alloy 5454 to a great degree prominent in marine applications. Aluminum Alloy 5454 Plates and Sheets has been utilized as a part of vehicle reinforcement plate because of its high quality component.
Specification
| Grades |
Aluminium Alloy 5454 |
| Thickness |
0.5mm – 250mm |
| Width |
1000mm-3000mm |
| Production |
Hot-Rolled (HR) / Cold-Rolled (CR) |
Chemical Composition
| Elements |
Percentage |
| Manganese (Mn) |
0.50 - 1.00 |
| Iron (Fe) |
0.0 - 0.40 |
| Magnesium (Mg) |
2.40 - 3.00 |
| Silicon (Si) |
0.0 - 0.25 |
| Chromium (Cr) |
0.05 - 0.20 |
| Titanium (Ti) |
0.0 - 0.20 |
| Zinc (Zn) |
0.0 - 0.25 |
| Copper (Cu) |
0.0 - 0.10 |
| Other (Each) |
0.0 - 0.05 |
| Others (Total) |
0.0 - 0.15 |
| Aluminium (Al) |
Balance |
Physical Properties
| Physical Property |
Value |
| Density |
2.69 g/cm³ |
| Melting Point |
645 °C |
| Thermal Expansion |
23.6 x10^-6 /K |
| Modulus of Elasticity |
70.5 GPa |
| Thermal Conductivity |
135 W/m.K |
| Electrical Resistivity |
34 % IACS |
Mechanical Properties
| Mechanical Property |
Value |
| Proof Stress |
85 Min MPa |
| Tensile Strength |
215 - 275 MPa |
| Hardness Brinell |
58 HB |
Aluminium Alloy 6061 Plates & Sheets
Aluminium Alloy 6061 Sheets Plates | Aluminium Alloy 6061 Sheets | Aluminium Alloy 6061 Plates Stockist
ASTM B209 Aluminium Alloy 6061 Sheets Plates Exporter | ASME SB 209 Aluminium Alloy 6061 Sheets Plates Manufacturer In India
Expinox Alloys are manufacturers, exporters & suppliers of Aluminium Alloy 6061 Plates & Sheets. Aluminium Alloy 6061 Plates & Sheets are a standout amongst the most flexible and generally utilized of the warmth treatable amalgams. This created tooling plate displays fantastic machinability, weldability, and medium quality. In spite of the fact that less solid then a large portion of the 2xxx and 7xxx composites, 6061 is normally chosen where welding or brazing is required or for its high consumption resistance in all tempers. It has remarkable joining attributes, great acknowledgment to anodizing and is effortlessly cool worked and framed in the tempered condition.
Aluminium Alloy 6061 Plates & Sheets is a medium to high quality warmth treatable amalgam with a quality higher than 6005A. It has great consumption resistance and great weldability albeit diminished quality in the weld zone. Aluminium Alloy 6061 Plates & Sheets has medium weariness quality. It has great cool formability in the temper T4, yet constrained formability in T6 temper. Not appropriate for extremely complex cross areas.
Specification
| Grades |
Aluminium Alloy 6061 |
| Thickness |
0.5mm – 250mm |
| Width |
1000mm-3000mm |
| Production |
Hot-Rolled (HR) / Cold-Rolled (CR) |
Chemical Composition
| Elements |
Percentage |
| Silicon |
0.40-0.8 |
| Iron |
0.7 |
| Copper |
0.15-0.40 |
| Manganese |
0.15 |
| Magnesium |
0.8-1.2 |
| Chromium |
0.04-0.35 |
| Zinc |
0.25 |
| Titanium |
0.15 |
| Others, each |
0.05 |
| Others, total |
0.15 |
| Balance, Aluminum |
|
Physical Properties
| Physical Property |
Value |
| Density |
2.70 g/cm³ |
| Melting Point |
650 °C |
| Thermal Expansion |
23.4 x10^-6 /K |
| Modulus of Elasticity |
70 GPa |
| Thermal Conductivity |
166 W/m.K |
| Electrical Resistivity |
0.040 x10^-6 Ω .m |
Mechanical Properties
| Mechanical Property |
Value |
| Proof Stress |
240 Min MPa |
| Tensile Strength |
260 Min MPa |
| Hardness Brinell |
95 HB |
