Incoloy Round Bars & Rods
Our Products
- Pipes & Tubes
- Plates And Sheets
- Round Bars
- Stainless Steel Round Bars
- Aluminium & Aluminium Alloys Round Bar
- Copper Nickel Alloy Round Bars
- Alloy Steel Round Bars
- Carbon Steel Round Bars
- Alloy 20 Round Bars
- Titanium & Titanium Alloys Round Bars
- Nickel & Nickel Alloys Round Bars
- Monel Round Bars
- Hastelloy Round Bars
- Incoloy Round Bars
- Inconel Round Bars
- Duplex Steel Round Bars
- Super Duplex Steel Round Bars
- Brass Round Bar
- Tantalum Round Bar
- Flanges
- Forged Fitting
- Buttweld Fitting
- Fasteners
Incoloy Round Bars & Rods
Incoloy Alloy 800/800HT/825 Round Bars & Rods
ASME SB166 Incoloy Alloy UNS N08800/N08811/N08825 Bars & Rods | Incoloy 800 Round Bars & Rods | Incoloy 800HT Round Bars & Rods | Incoloy 825 Round Bars & Rods
Incoloy 800/800HT/825 ASTM B446 Round Bars & Rods | Incoloy 800/800HT/825 DIN 1.4876/4958/59/2.4858 Round Bars & Rods Manufacturer
Driven by in fact propelled offices at our ultra-advanced assembling unit, we are introducing a broad scope of Incoloy Alloy 800/800HT/825 Round Bars & Rods. Our offered extent is absolutely made by our gifted experts by making utilization of forefront innovation and quality tested in consistence with set general standards.
Incoloy Alloy 800/800HT/825 Round Bars & Rods are utilized for a few applications, for example, in Equipment for Heat-Treating; Hydrocarbon splitting; Pressure vessels and warmth exchangers; and then some. As a producer, supplier, stockiest and exporter, we offer these UNS N08800/11/25 Round Bars & Rods in specially designed sizes and thicknesses according to the careful requests of our regarded customers. We offer these Incoloy Alloy 800/800HT/825 Round Bars & Rods in worldwide and national nature of benchmarks at savvy rates to our supporters.
Specification
| Standard | ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408 |
|---|---|
| Grade | Incoloy 800 (UNS N08800) Incoloy 800H (UNS N08810) Incoloy 800HT (UNS N08811) Incoloy 825(UNS N08825). |
| Range | 5MM DIA - 500MM DIA |
| Length | 100MM - 6000MM |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
Chemical Composition
| Incoloy | 800 | 800H | 825 |
|---|---|---|---|
| Ni | 30-35 | 30-35 | 38.0 – 46.0 |
| Fe | 39.5 min | 39.5 min | 22.0 min |
| Cr | 19-23 | 19-23 | 19.5 - 23.5 |
| Cu | 0.75 max | 0.75 max | 1.5 - 3.0 |
| Ti | 0.15-0.60 | 0.15-0.60 | 0.6 - 1.2 |
| Al | 0.15-0.60 | 0.15-0.60 | 0.2 max |
| C | 0.1 max | 0.05-0.1 | 0.05 max |
| Mn | 1.5 max | 1.5 max | 1.0 max |
| S | 0.015 max | 0.015 max | 0.015 max |
| Si | 1.0 max | 1.0 max | 0.5 max |
| Mb | - | - | 2.5 - 3.5 |
Mechanical Properties
| Inconel 800/800HT | |
|---|---|
| Tensile Strength | Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2%Offset) | Psi – 30,000 , MPa –205 |
| Elongation | 30 % |
| Inconel 825 | |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa –220 |
| Elongation | 30 % |
Physical Properties of Incoloy 800/800HT
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F |
Physical Properties of Incoloy 825
| Density | 8.14 g/cm3 |
|---|---|
| Melting Point | 1400 °C (2550 °F) |
© All Rights Reserved. Design By Mesotek